Latest Products
Contact Us
- #14 Headquarter Center Hi-Tech Park, 555 Panyu Avenue North, Guangzhou, China, P.R
- [email protected]
- +8615899568868
Laboratory Fume Hood
In the chemical laboratory, various harmful odorous gases, odors, moisture and corrosive substances will be generated during the experimental operation.
Description
Product Descripition
In the chemical laboratory, various harmful odorous gases, odors, moisture and corrosive substances will be generated during the experimental operation. In order to protect the safety of users and prevent the pollutants in the experiment from spreading to the laboratory, it should be used near the pollution source. fume hood.
Product Parameter
|
External dimensions ≥ (L×D×H) |
1000mm×800mm×2515mm; (dimensions can be customized and modified according to requirements) |
|
Internal dimensions ≥ (L×D×H) |
790mm×600mm×870mm. |
|
Height from table top to ground |
900mm |
|
Air velocity of suction port |
0.3～0.8m/s |
|
System exhaust volume |
570 m3/h |
|
Rated power |
400 W (excluding the power of the cabinet socket load (the load cannot exceed 500W)) |
|
Noise level |
≤68dB (A) |
|
Illumination |
≥400lx |
|
Height of front window glass opening |
750mm |
|
LED fluorescent lamp power |
8W |
|
Fan model |
MRD210-sl250 fan |
|
Weight |
Gross weight 270KG |
|
Net weight |
250KG |
Structural Features
1. The shell of the fume hood is made of 1.0mm cold-rolled steel plate with anti-rust treatment and electrostatic spraying, which has good finish and corrosion resistance.
2. The front window of the fume hood is a manual window, which can be stopped at any height within the range of travel.
3. The front window glass of the fume hood is 5mm thick tempered glass.
4. The fume hood control panel adopts tact switch
5. The electric control system of the fume hood has the functions of preventing overload and electric shock, with stable performance and long service life.
6. The fume hood socket is made of laboratory-specific safety products, with a transparent splash-proof cover, which is beautiful and durable.
7. The fume hood is equipped with a wall-type water supply cork, a water supply flow control valve, and a laboratory water tank, which is convenient for experiments.
8. The fume hood has a built-in PP centrifugal fan, with large air volume and low noise, which is convenient for customers to install.
9. The fume hood has a power-off memory function, that is, when a sudden power failure occurs, the working state before the power-off can be maintained when the power is turned on again, which is convenient for experimental operation.
Instructions
When using, stand or sit in front of the cabinet, lower the glass door as much as possible, and put your hand into the cabinet through the door to conduct experiments. Since the exhaust fan draws air inward through the open door, the harmful gas will not escape in large quantities under normal circumstances.
Hot Tags: laboratory fume hood, China laboratory fume hood manufacturers, suppliers, factory, laminar flow benches and booths, fume hoods for laboratory with cupboard, Bench Top Fume Hood, science room furniture, portable laboratory fume hood, air shower for lab
You Might Also Like
