The clean air shower is a special kind of purification equipment, and it is one of the equipment that must be used in the medical and health industry. There are many problems that need to be paid attention to in the process of its use. The editor of Hongji Cleanliness has compiled the following points for the maintenance of the air shower.
Instructions
1. Pay special attention when replacing high-efficiency equipment, and be sure to install it correctly according to the markings on the equipment when installing, and make sure that the sealing performance is good to prevent leakage.
2. Regularly remove the filtering equipment for cleaning and maintenance according to actual usage.
3. After a series of measures such as replacement and cleaning have been used, if there is no improvement, it means that the high-efficiency air equipment is clogged and should be replaced in time.
4. After installation, be sure to confirm that the frame of the filter equipment is not leaking, and use a dust particle counter to test it for leaks, and then use it after reaching the corresponding technical indicators.
5. If it is found that the wind speed of the equipment has become smaller, you should first check whether the surface of the initial air equipment is blackened. If there is, it means that a lot of dust has accumulated in the filter equipment, thus increasing the resistance of operation. At this time, the equipment should be removed for cleaning or replacement.
Precautions
1. The door of the air shower room cannot be ignored either. Regular maintenance is required, and the main attention should be paid to whether the electronic lock is aligned with its key hole.
2. Regularly inspect and repair the electrical circuits in the air shower.
3. Pay attention that the operating temperature of the air shower room cannot exceed 50°C, and open flames are strictly prohibited.
