Latest Products
Contact Us
- #14 Headquarter Center Hi-Tech Park, 555 Panyu Avenue North, Guangzhou, China, P.R
- [email protected]
- +8615899568868
Ultra-clean Workbench
The ultra-clean workbench is all steel and has a frame structure. The inner wall and inner top plate have no gaps, no screws, no dead corners for bacteria, and the outer surface is lead-free, non-toxic, and environmentally friendly.
Description
Product Description
This Ultra-clean Workbench is a general partial purification device operated by a single person, adopts the vertical air flow form, which can create a local high clean air environment. It is an ideal choice for scientific research, pharmaceutical, medical and health, electronic optical instruments and other industries. It has an all-steel frame structure, which can ensure good strength and stable operation, providing a certain degree of protection for the external environment, and protect the operators.
Features
1. Our Ultra-clean Workbench uses 70% clean air circulation, which can blow out soft wind, provide people with comfortable use experience and extend filter life.
2. Its gravity balance sliding front window will not hurt the operator's arm in case of failure, and has the characteristics of stable lifting and can be positioned at will.
3. The wind speed can be adjusted in 6 gears, controlled by touch switch and LED segment indicator system, which is very sensitive and easy to operate.
Product Parameter
Dimensions (mm) | 1020×790×1810 |
Work area size (mm) | 880×750×600 |
Weight (kg) | 152kg |
Cleanliness | Class 100 (@≥0.5μm US Federal 209E) |
Filtration efficiency | Dust particles with a diameter of ≥ 0.5 μm in every 1 liter of air in the working area are ≤ 3.5 / liter |
Average wind speed (m/s) | 0.25~0.51 |
Noise (dBA) | ≤63 |
Power supply | Single-phase AC 220V/50Hz |
Laminar flow direction | Vertical laminar flow |
Countertop Material | 304 stainless steel |
Liner material | Cold-rolled steel plate spray |
Cabinet material | Cold-rolled steel plate spray |
Mesa Vibration Half Peak (μm) | ≤5 |
Number of sockets in the cabinet | 1 |
Way to control | LED bar display Tact switch |
Circulating air volume | 70% |
Optional accessories | Without |
Precautions
The power supply of the ultra-clean bench mostly adopts three-phase four-wire, one of which is a zero wire, which is connected to the casing of the machine and should be firmly connected to the ground wire. The other three wires are all phase wires, and the working voltage is 380V. If the three-phase line is only connected to two phases, or one of the three phases is in poor contact, the sound of the machine is very abnormal, and the power should be cut off immediately for careful inspection, otherwise the motor will be burned. These common senses should be explained to the staff when they start to use the ultra-clean workbench, so as to avoid accidents and losses that should not be caused.
Hot Tags: ultra-clean workbench, China ultra-clean workbench manufacturers, suppliers, factory, dental lab working table, nitric acid storage cabinet, mobile lab workbench, fume hood vent, vertical and horizontal laminar flow hood, science lab workbenches
You Might Also Like
