Generally speaking, the balance room is a room where the platform is placed. Some balance platforms are also placed in the room, such as the physical and chemical room, mainly depending on the use process. Due to the accuracy of the balance, it is generally divided into ordinary balances, analytical balances, etc. There are many balances used for laboratory analysis. High-precision balances have certain requirements for the environment, such as windproof, direct sunlight, shockproof, dustproof, and anti-corrosive gas. Especially the requirements of constant temperature and humidity. The balance is usually set in a special balance room, but some weighing considerations are continuous, which is convenient for experimental analysis, and the balance platform is set nearby. But it is also necessary to pay attention to wind and radiation protection. Generally, it should be placed away from the door and placed in the corner.
In the overall layout planning, the balance room is close to the physical and chemical laboratory for easy use and high efficiency. For multi-story laboratory buildings, it is recommended that each floor has a balance room. The balance room is better to face north, and must be away from the source, and cannot be close to the high temperature room and the laboratory with strong electromagnetic interference. If there is a separate balance room, a buffer room can be set in front to reduce the impact of airflow on the weighing data. It is best to use double-layer windows in the balance room, which can better isolate heat and effectively prevent dust. A movable sunshade box can be set. When considering setting up air conditioning, the wind speed in the balance room should be set low and away from the top of the platform. The balance room is mainly placed on the platform in the sky, and other laboratory furniture should not be placed nearby to avoid dust accumulation. . Sinks and pipes cannot be placed indoors to avoid damaging the pipes. .
The lighting in the balance room is local lighting, and the lighting intensity is maintained. Some specific high-precision aerial platforms should be equipped with dust covers. The wall surface of the balance room is flat and dust is not easy to accumulate. The balance room can be set up for exhaust and ventilation, and ventilation is carried out when there is no weighing. Because there may be odors, corrosion and other items in weighing.
In a modern balance laboratory, monitoring equipment can be placed, which can mainly effectively monitor the standardization of operators and the accuracy of operational weighing data. . Experimental weighing data is the most basic and important part of the experiment.
In short, in a modern laboratory, in hardware, scientific instruments and perfect. In software, standardized operation and efficient technological innovation, so as to better improve the level of modern science and technology.
