In the clean workshop , The airshower room is the important key for controlling personnel and items enter or leave the clean area .
The following are some details that need to be paid attention to when using the airshower room :
1. First . Before entering the airhsower room , It's necessary to completely clean the dust and pollutants on the body . including dust ,
hair , clothes , etc . Because the role of the airshower room is to blow away the pollutant on the body through a strong air flow , If
there are too many pollutant on the body , the airflow will be weak ,and cannot achieve the ideal purification effect .
2. Secondly . Before entering the airshower room , you should wear clean clothes ,to completely isolate the external pollutant . Clean clothes
should be strictly disinfected and cleaned to ensure no pollutant . At the same time . It is necessary to carefully check whether the clean clothes are damaged or loose , which will cause pollutant to enter the air shower .
3. Thirdly . Before entering the airshower room . Avoid carry gun , mobile phone etc , that may produce tiny particles . Small dust or
microorganisms may be left on the gum or mobile phone . When the airflow blows on this itms . They may bring them into the airshower .
to affect the environment of the clean room .
4. Forth . The two door of airshower room are electronic interlock . Staff must ensure the front door is closed before the door can be opened . to prevent the pollution air flow into the clean area . Forcibly opening will damage the electronic lock or even the entire door .
5.Fifth , the using time of the airshower should be carried out in accordance with regulations, ranging from 15-30 seconds. Staff needs to ensure that the necessary cleaning process is completed within the prescribed time.
6. Sixth , Different clean workshops can have different cleanliness requirements. Therefore, when using the airshower room, pay attention to the degree of cleanliness, and strictly abide by the corresponding operating procedures and guidelines.
7. Finally, in the process of entering the airshower, you need to pay attention to maintaining your posture and actions. Stand straight as much as possible to avoid stirring clothes and produce dust. At the same time, do not move or walk too much to avoid causing airflow disturbances and affect the purification effect inside the airshower .
The above is the details of the cleaning workshop to pay attention to the use of the airshower. Only by doing all the preparations, wearing clean clothes, cleaning the body and items, maintaining a good posture and actions, standardizing the use of the door, etc. Provide an excellent environment for production and experiments.
