1. Water supply system
There should be a hand washing device at the exit of the laboratory, and the hand washing device should use a non-manual faucet. The biosafety laboratory recommends that the inspection zone net be equipped with an automatic hand disinfection device, and the water supply materials meet the relevant national requirements.
2. Drainage system
Floor drains should not be installed in the clean laboratory, and the drainage of the laboratory should be separated from the drainage of the living area. It should be ensured that the drainage of the laboratory enters the hospital sewage treatment station.
3. Pure water system
The equipment that mainly uses pure water in the laboratory is a biochemical analyzer. The laboratory pure water system should communicate with the person in charge of the laboratory before the design of the pure water water point and the water consumption of each water point.
1. Laboratory furniture can be divided into three categories: all-steel furniture, steel-wood furniture, and all-wood furniture according to the materials used. All-steel furniture has a beautiful appearance but the price is high. The disadvantages of load-bearing and waterproof have been rarely used, and appropriate furniture should be selected in consideration of the hospital's budget.
2. The material of the experimental table is mainly made of solid-core physical and chemical board, epoxy resin board and Trespa. Because there are not many high-temperature equipment used in the laboratory, it is recommended to use solid-core physical and chemical board and Trespa.
3. The length and style of the test bench should be determined based on the actual situation on site and the work needs before production. Too much furniture will occupy the working space, and insufficient furniture will affect the work.
